Electric Oil Pumps for Commercial Vehicles

Read more

Electric Oil Pumps for Electrified Buses, Trucks and other Commercial Fleets


Effective oil pumps for commercial vehicles move the fluid at a high viscosity due to low oil temperatures and delivers the required flow rate at lower viscosities with higher temperatures. Having software control over the speed of the pump is vital in the management of these wide temperature extremes. We recommend using smart pumps with modern CAN comms for demanding applications.

How to choose the right electric oil pump


Electric oil pumps are typically gear pumps which provide a linear relationship between pump speed and volumetric flow rate. However, the selection process must start with the fluid, its temperature and the required flow rate and pressure.

It is important to remember gear pumps produce a lower flow rate than centrifugal pumps. Therefore, higher pressures in a cold start scenario should be considered as the gear pump may fall short when maximum flow rate is required. 

We will ensure your components and thermal management system are both prepared for every temperature extreme. Our team will also ensure additional safety requirements are met for oil systems.

Explore our range of electric oil pumps or contact us to discuss your requirements.

ELECTRIC OIL PUMPS

EMP OP3530 Electric Oil Pump

The EMP OP3530 Brushless Electric Oil Pump is a 2-stage positive displacement gear pump equipped with both scavenge and feeder sections. The pump can be used in a dry sump arrangement and is designed for use with most light to medium weight oils.

ELECTRIC OIL PUMPS

EMP OP40 Electric Oil Pump

With a flow capacity up to 4 gal/min and discharge pressures up to 100 psi, the EMP OP40 Electric Oil Pump can handle a variety of fluid transfer applications including those for use with motor oil, hydraulic fluid, transmission fluids and gear lubes.

ELECTRIC OIL PUMPS

EMP OP80 Electric Oil Pump

With a flow capacity up to 8 gal/min and discharge pressures up to 80 psi the EMP OP80 Brushless Electric Oil Pump can handle a variety of fluid transfer applications including those for use with motor oil, hydraulic fluid, transmission fluids and gear lubes.

ELECTRIC OIL PUMPS

EMP OPC Cartridge Electric Oil Pump

The EMP SmartFlow brushless electric oil pump is now available in a cartridge style. This allows for the same premium performance of the OP40 and OP80 oil pumps, but in a smaller, lighter profile without any of the added fittings or housing of a traditional externally mounted pump.

350 watt oil pump
ELECTRIC OIL PUMPS

350 watt Oil Pump

A high efficiency CAN controlled Brushless DC permanent magnet wet rotor oil pump is an advanced system designed for optimal performance and reliability in lubrication applications..